From season ahead to maintenance plans renewed
Before the first cold snap or heat wave, every maintenance customer is offered a renewal and a tune-up slot while your schedule still has room.
- 1Lists the customers whose plan expires or whose tune-up is due, from your field-service software.
- 2Drafts a renewal message with the equipment on file, your plan price, and tune-up times grouped by area to cut driving.
- 3Waits for your approval of the price, the wording and the time slots before anything goes out.
- 4Sends it by text and email, and books the tune-up when the customer picks a time.
- 5Renews the plan only once the customer says yes and pays through your usual process, and logs it in the CRM.
Your pre-season date arrives (for example, six weeks before heating or cooling season), or a maintenance plan is about to expire.
The plan price, any promotion, the message, and how many tune-ups a day go on the schedule.
Never renews or charges anyone without their yes, never says equipment is unsafe or failing without a technician’s inspection, never promises a rebate or invents a deadline, never messages a customer who opted out.
What it could be worth to you
Your numbers, not ours. Change any field: the result updates as you type.
Pays for itself on time saved alone.
These are your assumptions, not measured results. The price starts at the list price of the plan that covers every module this flow runs on (named under the field); there is no setup fee on a module or a department, and ad spend is separate. Time saved depends on your process: we measure it with you during the pilot. Extra customers are yours to estimate; we start them at zero.
Pick the job that costs you the most time
Most clients start with one flow on a 30-day pilot, measured against how long it takes today.